power supply model:2050
input: 100-240VAC , 50/60hz, 0.5A
output: 12V/2A and 5V/2A
burnt components:
2N60 mosfet, fuse 2A, resistor 0.33R, two diodes 1N4007, changed fotoaclopador and electrolytic capacitor 22uF / 400v, after replacement of the components does not provide the source voltage at the output and the transistor 2N60 heats up quite apart from not having any tension upon 22uF / 400V capacitor. You can find this schema source? . Also replaces the TL431 but not resolved. It also uses the transistor SS9014 and SS9015 on the input source.
input: 100-240VAC , 50/60hz, 0.5A
output: 12V/2A and 5V/2A
burnt components:
2N60 mosfet, fuse 2A, resistor 0.33R, two diodes 1N4007, changed fotoaclopador and electrolytic capacitor 22uF / 400v, after replacement of the components does not provide the source voltage at the output and the transistor 2N60 heats up quite apart from not having any tension upon 22uF / 400V capacitor. You can find this schema source? . Also replaces the TL431 but not resolved. It also uses the transistor SS9014 and SS9015 on the input source.
power supply burned, HD source to go with 5V and 12V
Aucun commentaire:
Enregistrer un commentaire